Product Description
SB 2354 Oil Stain Remover [OTC VOC] is a multi-use degreaser for the fast and efficient removal of surface oil and many other contaminants from concrete and other masonry. In addition to oil stains, SB 2354 can be used successfully to remove acrylic curing compounds, tire marks, chewing gum, asphalt seal coat from concrete and some types of graffiti. SB 2354 can be used in conjunction with SB 2320 Poultice to produce a deep cleaning compound for removal of magic marker graffiti and certain oil stains the are deeply penetrated into the concrete or masonry that may resist acceptable removal by a paint stripper or liquid cleaner like SB 2354.VOC content <2% with LVP exemption
Preparation
Prior to application of SB 2354, scrape off any heavy deposits of oil or grease and remove any loose dirt. Protect all non masonry surfaces from contact with the cleaner. This product will likely damage painted surfaces and asphalt.
Dilution and Coverage
Dilution: Product used undiluted — test application recommended
Coverage: Dependent upon substrate and other conditions
Application
Spray or mop undiluted SB 2354 on the affected areas. Make sure that spray equipment has solvent resistant fittings and hoses. Dwell times of up to 30 minutes may be required for the best cleaning effect. Removal with pressure rinsing equipment will give the best results. The use of a hot water pressure rinsing machine may be beneficial in some situations. If pressure rinsing equipment is not available, scrub with water and a stiff broom prior to rinsing with a garden hose. When reapplication is required, wait until the surface had dried before applying the second treatment.
Do not use in the close proximity of pedestrians, vehicles, open flames or near sparks. SB 2354 Oil Stain Remover is not a highly aggressive cleaner but unknown adverse reactions with surfaces other than concrete may occur. Do not use for the removal of oil stains from asphalt surfaces. When using SB 2354 in the proximity of asphalt paving or asphalt shingles, keep the asphaltic surface wet during removal from the non asphalt masonry. SB 2354 may be used on surfaces other than concrete only after adequate testing has been done.FOR OUTDOOR USE ONLY.
Technical Data
- Appearance: Amber Liquid
- Biodegradable: Yes
- Flash Point: 212 Degrees F
- Odor: Petroleum
- pH: N/A
- Rinsing: Not Complete
- Solubility: 100%
- Wetting Ability: Excellent
Safety
May be fatal if swallowed and enters airways. Causes mild skin irritation. Causes serious eye damage. Suspected of causing cancer.Refer to product SDS or product label for hazard statements, precautionary statements and safety information