Product Description
ResinForce® Polyurea PREMIUM Primer (RF-PLY100)
ResinForce® Polyurea Primer (RF-PLY100) is a premium two-component primer that delivers exceptional adhesion and durability on properly prepared concrete. Its fast-curing formula creates a strong foundation for polyurea, polyaspartic, and other resinous flooring systems, making it an ideal upgrade from standard primer systems. Low odor, 98% solids.
Key Features:
- Exceptional Adhesion: Provides outstanding bond strength on a wide range of surfaces, including concrete, metal, and existing coatings.
- Versatile Application: Most effective when substrate temperatures range from 50°F to 80°F with a relative humidity less than 85%. This primer adapts well to both high and low temperature extremes.
- Efficient Curing: Recoat time 2 hours @ 72°F. RF-PLY100 allows for flexibility in project scheduling and minimizes downtime.
- User-Friendly: Its 2:1 mix ratio by volume (100:63 by weight) and a working time of 5-15 minutes facilitate easy application and consistent results. Emits virtually no odors and can be applied indoors. For residential and commercial use.
- NOT UV STABLE, use as a base coat only with 100% full flake coverage, do not expose to direct sunlight.
Cure Time (70-72°F @ 50%RH):
- Recoat: 2-12 hours
- Tack Free: 2-4 Hours
- Light Traffic: 8-12 Hours
- Full Cure: 2-3 Days
Technical Specifications:
- Coverage Rate: 125 -200 sq. ft. per gallon at 6-13 mils thickness.
- Bond Strength: Exceeds 350+ psi (substrate failure) according to ASTM D4541, indicating superior adhesion.
- Hardness & Resistance: Achieves a Shore D hardness of 45-50 and shows excellent abrasive resistance.
Surface Preparation & Application:
- Preparation: Ensure the surface is clean, dry, and free of contaminants. Concrete should be fully cured and mechanically prepped to achieve a CSP 2-3 profile. For existing coatings, sand thoroughly.
- Mixing: Thoroughly mix Part A and Part B before application. Combine in a clean container and stir well to ensure uniformity.
- Application: Apply with a flexible squeegee or lint-free roller. For edges and corners, use a brush or small roller. Avoid puddling and ensure subsequent coats are applied while the primer is still wet or tacky.
Safety & Handling:
For professional use only. Refer to the SDS sheets for detailed safety information. Handle with care, following all recommended safety procedures.
Warranty:
ResinForce® Products, LLC provides product performance information based on the best knowledge available. Users are responsible for testing the product in their specific application environment to ensure suitability.
