The industry leader and cleaning benchmark for alkaline extraction rinses, Dry Slurry is powerful enough to be used for one-step or two-step hot water extraction cleaning processes and yet gentle enough for use on 5th generation stain-resist nylon carpets. This economical powdered product can be used with truckmounts or portables on most synthetic fibers. Solvent-boosted formulation removes heavy suspended greasy soils, grime and prespray residue that others leave behind.
Always pre-test surfaces to be cleaned for colorfastness in an inconspicuous location before use. Use according to all label directions.
TRUCKMOUNT USE: Mix 3 cups into 5 gallons of warm water until completely dissolved to make truckmount concentrate for use in chemical injection system. For residential carpet, set truckmount chemical injection system for 2 gallons per hour. For commercial carpet, set truckmount chemical injection system for 3 gallons per hour.
PORTABLE USE: For residential carpet, mix ½ to ¾ ounces per 5 gallons of hot water. For commercial carpet, mix 1 to 1½ ounces per 5 gallons of hot water.
RTU pH: 9.6–9.9
Coverage: One 6 lb. jar makes up to 1,040 gals. of RTU solution for approximately 400 sq. ft. per diluted gal.
Dilution portables: 0.5 to 1.5 oz. per 5 gals. of water