F9 Calcium and Efflorescence Remover - 1 Gallon
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 4 or above||and pay only $41.00 each|
-Does not Burn Intact Skin
-Up to 95% Less Fumes than Full Strength HCL Acid
-Works Better than Full Strength Muriatic Acid with Less Harmful Effects
-Quickly Removes Efflorescence, Calcium, Calcium Carbonate and Hard Water Stains
Concrete and Masonry: Use to clean efflorescence and calcium. At stronger concentrations, use to etch concrete in preparation for painting or coatings. At diluted ratios, use as a general cleaner. Removes excess mortar from brick and mud stains.
Always Add Acid to Water, NOT Water to Acid
Pre-Cleaning: If necessary, power wash surface to be cleaned using a commercial grade pressure washer, degreaser and surface cleaner to remove oil and debris. An alkaline concrete cleaner may be used. Rinse well. Cleaning the concrete first will remove loose dirt and debris, clearing the path for better cleaning.
Dilution Ratios (Water to Product):
For Concrete, Brick, Paver, Grout & Masonry
Thick Calcium Stains and Concrete Prep for Coatings: 1:1 up to 4:1
Medium Calcium Stains: 4:1 up to 8:1
Light Calcium Stains: 8:1 to 12:1
Powdery Efflorescence Cleaning 12:1
General Cleaning 8:1
Our go to for many cleaning needs!
We use this product to remove red clay stains from concrete and houses in SC. It saves us time and produces a superior result over anything else we have tried.