Product Description
RATTLER O2 is a Mold and Mildew Stain Remover, which bleaches fast and removes all impurities through a sterilizing process. Rattler O2 also removes yellowing which can occur on synthetic carpet and upholstery, treats stubborn urine stains, and is excellent at removing water stains and browning. Rattler 02's powerful oxidation process also neutralizes odors.
MOLD STAIN REMOVAL INSTRUCTIONS:
Apply Rattler 02 Full Strength or dilute 1:1 - 1:3. Saturate the area with Rattler 02. Allow 5-10 minutes dwell time, the longer the better. Once Rattler 02 starts to react with the surface, (foams up) agitate with appropriate equipment. Hepa Vac when dry as needed. Wood will continue oxidizing (bleaching) for 24 to 36 hours. Re-apply as needed.
ORGANIC STAIN REMOVAL INSTRUCTIONS:
May bleach natural fibers, may dull polished marble. Wear gloves and eye protection. Clean discolored area thoroughly and remove as much as possible. Dilute one part Rattler with 2-3 parts water (1:2 - 1:3), apply across the stain and allow 5 to 10 minutes dwell time. (The longer the better). Agitate and blot with a white absorbent towel. If not satisfied apply a second application and allow to air dry. Rattler 02 will keep oxidizing as the area dries.
COVERAGE:
500 sq. ft. per gallon on porous surfaces and up to 1200 sq. ft. per gallon on non-porous surfaces. Note that coverage rates are approximate and depend on how heavily Rattler 02 is applied to the substrate.
NOTE: Some stains are permanent. No product can remove all stains.
4.5-5.5 pH
Test for product compatibility in an inconspicuous area. Can bleach some fabrics.
This product can ship UPS Ground without added Hazmat Fees.
For SDS CLICK HERE