Clean Advantage Solvent Sealer is an advanced solvent-base, fluorochemical for use on grout, stone, tile, concrete, carpet, upholstery, and wood to provide maximum protection against both oil and water base stains. This product has superior penetration and migration properties to supply the optimum long-lasting protection, and is formulated with the highest concentration of active ingredients. Is not a topical coating and will not suffocate the treated surface.
Do not dilute. This product is ready-to-use.
1) Shake gently before use.
2) Always test in an inconspicuous area before use.
3) Apply to wax free or coating-free, clean surface with a low pressure sprayer, grout applicator, or brush.
4) Dries within one to two hours. Allow to cure for 24 hours before use.
Will vary depending on width of grout lines, porosity and absorbency of surface as well as desired protection: Ranges from 300 to 2,000 square feet per gallon.
ADVANTAGES & USAGES
Dries invisible; colorless and odorless. Leaves no white residue, pooling or settling.
Excellent repellency of Oil and Water-type soils.
Hypoallergenic when dry. Not harmful to infants or pets.
User safe. Nonflammable.
Professional use only.
For use on grout, stone tile, concrete, carpet, upholstery, and wood. Superior penetration and leveling properties. Provides breathable protection; not a topical coating. Contains no acrylic, urethane or silicone. Nontoxic, contains no xylene, toluene or chlorinated solvents.
For SDS Sheet, Please CLICK HERE
Videos Hide Videos Show Videos
4 Reviews Hide Reviews Show Reviews
Awesome product. Crazy water
We don’t leave home without it. Easiest up sell because I know it works.
A few days after applying Advantage a contractor left dirt on this cream & baby blue chair. With GM standing there all I did was hit the areas and dirt fell off. We just looked at each other and smiled!
Dave said “Try a gallon” so I bought a case. It arrived quickly and well packaged with no leaks. I like the idea of a solvent based protectant that DOES NOT ADD MOISTURE to a freshly cleaned carpet, but I do not like the usual solvent smell that forces customers out of the home for a few hours! I applied protectant to 2200 square feet of commercial glue down carpet using an electric sprayer, while my helper brushed it in. We covered the entire area, halls and rooms in about 20 minutes. I could not smell any odor whatsoever. No trace, no dizziness, nothing. The carpet felt a bit slick for a little while, but quickly absorbed the Clean Advantage and seemed to be rapidly drying. Going in and out of the building clears the nose, but even so, no odor. If you are looking for something that won’t run customers out of the house or office, I recommend you switch to this great product.